2024 九州彩票苹果版 R系列 R430

2024 九州彩票苹果版 R系列 R430

滑动查看更多

  • 一年 2024
  • 使 九州彩票苹果版
  • 模型 R系列
  • 引擎 D1830-CR-TIE4-WL5
2024 九州彩票苹果版 R系列 R430

2024 九州彩票苹果版 R系列 R430

2024 九州彩票苹果版 R系列 R430

紧凑的 design with impressive power allows the R430 to get the work done where larger loaders can't fit. The R430 also delivers big on comfort in every season with an available enclosed cab featuring heat and A/C.

功能可能包括:

强大的久保田发动机

The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.

舒适的工作站

Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.

LOAD SENSING TRANSMISSION

As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.

LIMITED SLIP DIFFERENTIAL

Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction.

混合连杆设计

The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.

后挖沟机

The R430 takes versatility to a new level in compact wheel loaders. The RBK4009SA backhoe allows the operator to dig a trench up to seven feet deep and 24 inches wide.

引擎

引擎 D1830-CR-TIE4-WL5
排放 层4
发动机额定转速 Output (SAE J1995 gross): 2600 rpm | Output (SAE J1349 net): 2600 RPM
发动机功率 Output (SAE J1995 gross): 47.6 HP (35.5 kW) | Output (SAE J1349 net): 44.5 HP (33.2 kW)
位移 11 cu. in.

动力传动系统

差速锁 Front/Rear Axle Traction Lock: Limited slip differential
传输 静液压传动装置

刹车

制动系统类型 封闭式湿阀瓣

轮子 & 轮胎

轮胎, Rear Specification 12.5/70-16-8PR

操作

操作条件 Traction Force: 5485 lbs (24.4 kgf) | Bucket Breakout Force: 5215 lbs (23.2 kg) | Rated Operating Capacity: 2298/2474/504/1625 (ROC) | Loader Raise / Lower Time: 4.4 / 3.3秒
操作速度 运行速度高:12.每小时4英里(20英里).0 kph) | Traveling Speed Low: 3.每小时0英里.8公里)

液压

液压流 辅助率:11.1 GPM (42).1升分钟)
最大压力 Auxiliary psi: 2697 kgf (18.6 cm2)

总长度 14' 4”英尺(4355毫米)
总高度 8' 3”英尺(2515毫米)
总宽 4' 12"英尺(1520毫米)
离地间隙 11" ft (280 mm) | Loader Clearance Circle: 12' 1" ft (3695 mm)
转弯半径 Track Circle: 10' 1" ft (3085 mm)
Frame Oscillation Angle: 8 degree | Steering Angle: 40 degrees | Reach Fully Raised at Maximum Dump Angle: 2ft9in | Maximum Dump Angle: 44 degrees | Articulation Angle: 40 deg. (each direction) | Angle of Rear Frame Oscillation: ±8 (deg.)
高度 Hinge Pin: 9ft2in | Dump 高度 at Fully Raised Position: 7ft2in

能力

体积 Standard Bucket Capacity: 0.5 yd3
货物的能力 Tipping Load- Full Turn: 4596 lbs. (2085公斤)/ 4949磅. (2245公斤)/ 3009磅. (1365公斤)/ 3251磅.(1475 kg) | Tipping Load - Straight: 5335 lbs (2420 kg)/5743 lbs (2605 kg) / 3494 lbs (1585kg)/3770 lbs (1710 kg)
吊挂能力 at Ground Level: 3687 lbs (16.4 kN)
燃料容量 14.3加仑(54升)
液压能力 系统:15.3 gal (58 l) | Reservoir: 11.1加仑(42升)

权重

重量,按运行顺序 7758 lbs (3519 kg) / 8232 lbs (3734 kg)

产品摄影